Plot 105, Igbo-Echie Road, Opposite Enarco, Rumuokwurusi, Port-Harcourt, Rivers State, Nigeria +234 8103567175 (Support PHC)
        Plot 22, Okesuna-Leso Road, by Greenspring Schools, Awoyaya. lekki-Epe Expressway -Lagos, Nigeria +234 8161361344 ( Support Lagos )

ISO / IEC 17025 Accredited Testing Scope

ISO / IEC 17025 Accredited Testing Scope

Accreditation is a process in which certification of competency, authority, or credibility is presented.

The management of Mudiame International Limited is committed to providing inspection, calibration and testing services that not only meet the requirements of our customers, but exceed their needs in terms of high quality and good professional practice, delivery Schedule and cost. it is therefore the policy of the company to implement and operate a quality Management System that conforms fully to the requirements of ISO 9001:2008 standard in all its activities. All testing activities shall be conducted within the clients requirement, standard specification and also conform to EN ISO/IEC 17025:2005

Mudiame is EN ISO/IEC 17025 certified as an AES Accredited Testing and Calibration Laboratory in Nigeria and one of the leading in WEST Africa.

Mudiame Laboratory Implement and operate a quality Management System that conforms fully to the requirements of ISO 9001:2008.

 

SCOPE OF ACCREDITATION

FIELDS OF TESTING ACCREDITED TEST METHODS TITLE OF TEST METHODS
Chemical Bs 1377 part 3 test 9 pH in soil
Chloride and Sulphate MIL-MECH-CC-PROC-046 Procedure for the determination of chloride and sulphate in soil using EDXRF method
ASTM 1475 Standard Guide for Metals Identification, Grade verification and Sorting 4.6.1.1-X-ray Fluorescence Spectrometry (Portable)-Optical Emission Spectrometry (Portable)
ASTM C 115 Standard Test Method for Chemical analysis of Hydraulic Cement. Clause 5.3,5.4
ASTM E 415 Standard Test Method for analysis o Carbon & Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM E 1086 Standard Test Method for analysis Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
Astm D 4294 Standard Test Method for Sulphur in Petroleum and Petroleum products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 6481 Standard Test Method for Determination of Phospurus, Sulfur, Calcium and Zinc in in Lubrication oils by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 1293 Standard Test Method or pH in water
ASTM D 1125 Electrical Conductivity and Resistivity of water
DIN EN ISO 8249 Ferrite content determination(via Portable Ferrite Meter)
MIL-MECH-CC-PRO-041 Colorimetric Analysis of WATER (HANNA HI 82300 Spectrophotometer). Iron, Chromium, Phosphate, Zinc, Free Chlorine, Sulfate, Manganese, Copper, Nitrite, Nitrate, Calcium hardness, Ammonia, Turbidity (Hydrazine) and Alkanity
Geotechnical ASTM D 698 Standard test method for laboratory compaction characteristics of soil usin standard method
ASTM D 1557 Standard test method for laboratory compaction characteristics of soil usin modified method
ASTM 1883 Standard test method for CBR of laboratory compacted soil
ASTM D 4944 Standard test method for field moisture test determination by calcium carbide
ASTM D 2937 Standard test method for field density test by dry cylinder method
ASTM D 4318 Standard test method for liquid limit , plastic limit and plasticity index of soil
ASTM C 136 Standard test method for sieve analysis of fine coarse aggregates
ASTM C 117 Standard test method for materials finer than 75micron
BS 812:105 Standard test method for flakiness and elongation of coarse aggregates
ASTM C 566 Standard test method for tatal evaporable moisture content of aggregates and soils
ASTM C 29 Standard test method for bulk densities and voids in aggregate
BS 812:110 Standard test method for aggregate crushing value
ASTM D 2216 Standard test method for laboratory dtermination of water (moisture) content of soil and rock by mass
ASTM C 128 & 127 Standard test method for specific gravity and absorption fine and coarse aggregate
ASTM C 142 Standard test method for clay lumps and friable particles in aggregate
ASTM C 172/M 172 Standard test method for sampling of fresh concrete
ASTM C 231/M 231 Standard test method for air content determination of fresh concrete
BS EN 12390-3 Standard test method for compressive test of hardened concrete
ASTM C 191 Standard Test method for Time of Setting of Hydraulic Cement by Vicat Needle
BS 12:2 Standard test method for expansion of hydraulic cement paste by le-chetelier mould
ASTM C 109 Standard test method for compressive strength test of hydraulic cement mortar
ASTM C 1611 Standard test method for self-compacting concrete of hydraulic cement
ASTM C 187 Standard test method for consistency of hydraulic paste
Mechanical ISO 5173, ASTM E 190, E 290, A 370, E 340, ASME IX, API 1104, AWS D1.1, ISO 15614-1 Guded Bend Test
ASTM E 384, E 340, E 3, E 140, ISO 6507 (part 1,2,4) Vickers Hardness Test
ASTM E 10, E 340, E 3, E 140, ISO 6506 (part 1,2) ISO 15614-1 Brinell Hardness Test
ISO 6508 (part 1,2) ASTM E 18, E 340, E 3, E 140, ISO 15614-1 Rockwell Hardness Test
ASTM E 23, E 370, E 340, ASME IX, API 1104, AWS D1.1, ISO 15614-1 Charpy Impact Test
ISO 6892-1, 4136, ASTM E 8/E 8M, A 370, ASME IX, API 1104, AWS D1.1, ISO 15614-1 Tranverse Tensile Test
ASME IX, API 1104, AWS D1.1 Fillet Weld Fracture Test
API 1104 Nick Break Test
BS 4449, ISO 15630, BS EN ISO 6892-1 Rebar Testing
Metallography ASTM E 340, E 3, E 1951, ISO 5817, 6520-1, 6520-2, 17845, ASME IX, API 1104, AWS D1.1, ISO 15614-1 Macro Examination of Metals and Alloys
ASTM E 407, E 3, E 1951, ASME Handbook Vol. 9, Vol. 11 Micro Examination of Metals and Alloys
ASTM E 562, E 407, E3 Determination o Volume Fraction by Manual Point Count
Corrosion ASTM A 923 (Method A & C) Detection of Detrimental Intermetallic Phase in Stainless Steels
ASTM A 262, A 370, iso 3651-2 Detection of Susceptibility to Intergranular Attack on Austenitic Stainless Steel
ASTM G 28 Detection of Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
ASTM G 48, G 46 Pitting Corrosion Resistance of Stainless Steels and related Alloys