Plot 105, Igbo-Echie Road, Opposite Enarco, Rumuokwurusi, Port-Harcourt, Rivers State, Nigeria +234 8103567175 (Support PHC)
        Plot 22, Okesuna-Leso Road, by Greenspring Schools, Awoyaya. lekki-Epe Expressway -Lagos, Nigeria +234 8161361344 ( Support Lagos )

About us

Who we are

Instrumentation and Calibration

Our Calibration team  ensure the accuracy of your Gas Analyzers, Dew Point Gauges, Pin Hole, Thickness Gauges, Pressure Gauges etc... Read more

Metallurgy / Mechanical Destructive Test

In our well equipped testing laboratory, we carried out to the specimen’s failure, in order to understand a specimen’s structural performance or material behavior under different loads.  This include the following mechanical test  : Tensile Test, Impact Charpy Test, Bend Test, Hardness Indentation Test, Macro & Micro Examination (General and for Grain Sizing –G.S), Nick Break and Magnetic test. Read more

Non-Destructive Test

We evaluate the properties of a material, component or system without causing damage to the material being tested. Our testing method include: Phase Array (PAUT),  Long Range Ultrasonic Testing (LRUT), Close Proximity Radiography.

Chemical Analysis

Optical Emission Spectrometry for Weld chemistry and Alloy verification of Steels,  X-ray fluorescent for Positive Material Identification (PMI), Ferrite Meter Test .

Corrosion Test

SSC Test,  HIC TestCathodic ProtectionIntergranular Corrosion (IGC).

CTOD Test

Crack tip opening displacement (CTOD) is the displacement at the original crack tip and the 90° intercept.
 

Our Vision

 To be a Leader in the Laboratory Calibration, Testing Services, Training and Competency Certification.

 

We meet 100 percent of customer contractual requirement!

 

Our Value Proposition

1.

Satisfy Standard Requirement
We ensure that activities of Mudiame international limited are carried out satisfying applicable regulatory and statutory requirement.

2.

Meet 100% of Customers Requirements
To assure that products and services provided by Mudiame international limited meet 100 percent of customer and contractual requirement.

3.

100% Safety Compliance
To ensure that all personnel carry out work related activities with hundred percent compliance to safety and environmental conservation.

 

4.

Quality in all
To develop, implement and maintain a well defined and functional quality management system which complies with the requirement of iso 9001:2008 standards.