Plot 105, Igbo-Echie Road, Opposite Enarco, Rumuokwurusi, Port-Harcourt, Rivers State, Nigeria +234 8103567175 (Support PHC)
        Plot 22, Okesuna-Leso Road, by Greenspring Schools, Awoyaya. lekki-Epe Expressway -Lagos, Nigeria +234 8161361344 ( Support Lagos )

ISO / IEC 17025 Nigerian Laboratory | Mudiame

iasMudiame International Limited is an ISO 17025 accredited Nigerian based Testing, Calibration and Inspection Company offering services to the Oil, Gas and Allied Industries.Our vision to be the leader in  Laboratory Testing Services laid us to a full well equipped One Stop Laboratory. With our eyes kin on quality we execute all various tests required ranging from Mechanical Destructive Test to Non Destructive test (NDT),Civil test and Chemical Analysis . Our wide range of test with international Standard can be readily obtained in Nigeria instead of going oversees to perfom such tests.



Our Services


Instrumentation and Calibration

Our Calibration team ensure the accuracy of your Gas Analyzers, Dew Point Gauges, Pin Hole, Thickness Gauges, Pressure Gauges etc…" >>Read More


Metallurgy / Mechanical Destructive Test

We carried out to the specimen’s failure, in order to understand a specimen’s structural performance or material behavior under different loads.  This include the following mechanical test  : Tensile Test, Impact Charpy Test, Bend Test, Hardness Indentation Test, Macro & Micro Examination (General and for Grain Sizing –G.S), Nick Break and Magnetic test. >>Read More


Non-Destructive Test ( NDT )

We evaluate the properties of a material, component or system without causing damage to the material being tested. Our testing method include: Phase Array (PAUT),  Long Range Ultrasonic Testing (LRUT), Close Proximity Radiography. >>Read More



Civil Material Investigation & Chemical Analysis

All Soil Sampling at various Depths and Materials for Tests
Soil Investigation and Geotechnical Survey Services >>More on Civil Material Analysis
Optical Emission Spectrometry for Weld chemistry and Alloy verification of Steels, X-ray fluorescent for Positive Material Identification (PMI), Ferrite Meter Test .>>More on Chemical Analysis


Corrosion Test

SSC Test, HIC Test, Cathodic Protection, Intergranular Corrosion (IGC). >>Read More



Crack tip opening displacement (CTOD) is the displacement at the original crack tip and the 90° intercept. >>Read more



Subscribe to our Newsletter!




Powerful and effective cooperation lasting for years...

  • Agidi Benneth , Saipem

    I am very happy, not just happy but proud of Mudiame International Limited ,because for every step of encouragement that is given to this company,it increases the leap bond.

    Agidi Benneth, Saipem Contracting Nigeria
    Read more